Hey!
I've been on this site for around 4 years now (with another account called -Eden-Electro-), and I think it could be nice if I share some TIPS to have a better mixing/instruments
1. LAYERING
Layering is the key to add depth in your instrument, and can be done like that:
1 - Select the instrument you want to layer
2 - Copy and paste it (CTRL+C & CTRL+V)
3 - Go to Options → Avanced
4 - Click on Clone
Now you have cloned your instrument. It should be called < [Instrument Name] 2 >
5 - Make your instrument go 1 note UP ↑ or 1 note DOWN ↓
6 - Still on Options → Avanced, change the Detune so it's the same note as before (Add 1 if you moved the instrument DOWN ↓, go to -1 if you moved it UP ↑)
7 - Hold SHIFT and drag the Detune value a little bit.
If made correctly, this will make a Chorus effect on your instrument
Exemple:
2. Synthesizer LFO
The trick I'm going to show you is nice to add a texture to your synthesizer
1 - Go to Options → Synthesizer
2 - Enable LFO by clicking the 1/4 under the LFO tab
3 - Click on the arrow at the right, and chose Custom...
4 - I recommand typing a value between 5000 and 15000, I personally like 8888
5 - Drag the intensity as you like, and experiment using Sn, Sq, St and T. I personnaly like St (Sawtooth)
If made correctly, this will add texture and High EQ on the Synthesizer
Exemple:
3. -3600 DETUNE
The trick I'm going to show you have an incredible potential, it can make SFXs, Custom instruments etc.
1 - Take a new instrument and make it going all the way the the bottom of the grid
2 - Open console by pressing F12 (or FN+ F12)
3 - Make sure you are in the CONSOLE tab and whrite: ConvertToDetuneMarkers()
4 - Now you should have a C5 note of your instrument and a -3600 detune marker
5 - Now experiment with your -3600 detuned instrument, try it on DRUMS too!
Exemple:
Thread still WIP :D
I've been on this site for around 4 years now (with another account called -Eden-Electro-), and I think it could be nice if I share some TIPS to have a better mixing/instruments
1. LAYERING
Layering is the key to add depth in your instrument, and can be done like that:
1 - Select the instrument you want to layer
2 - Copy and paste it (CTRL+C & CTRL+V)
3 - Go to Options → Avanced
4 - Click on Clone
Now you have cloned your instrument. It should be called < [Instrument Name] 2 >
5 - Make your instrument go 1 note UP ↑ or 1 note DOWN ↓
6 - Still on Options → Avanced, change the Detune so it's the same note as before (Add 1 if you moved the instrument DOWN ↓, go to -1 if you moved it UP ↑)
7 - Hold SHIFT and drag the Detune value a little bit.
If made correctly, this will make a Chorus effect on your instrument
Exemple:
2. Synthesizer LFO
The trick I'm going to show you is nice to add a texture to your synthesizer
1 - Go to Options → Synthesizer
2 - Enable LFO by clicking the 1/4 under the LFO tab
3 - Click on the arrow at the right, and chose Custom...
4 - I recommand typing a value between 5000 and 15000, I personally like 8888
5 - Drag the intensity as you like, and experiment using Sn, Sq, St and T. I personnaly like St (Sawtooth)
If made correctly, this will add texture and High EQ on the Synthesizer
Exemple:
3. -3600 DETUNE
The trick I'm going to show you have an incredible potential, it can make SFXs, Custom instruments etc.
1 - Take a new instrument and make it going all the way the the bottom of the grid
2 - Open console by pressing F12 (or FN+ F12)
3 - Make sure you are in the CONSOLE tab and whrite: ConvertToDetuneMarkers()
4 - Now you should have a C5 note of your instrument and a -3600 detune marker
5 - Now experiment with your -3600 detuned instrument, try it on DRUMS too!
Exemple:
Thread still WIP :D
-Eden-
-
x1
-
-
x1
- Abraham.
-