Online Sequencer Wiki - User contributions [en]

Custom Instrument Archive

2026-02-19T02:51:13Z

Wasedrftq1234: found out how to make bag pipes on brass

This is a list of many custom instruments and sounds created by the OS community.

= Instruments =

=== Oboe/Bassoon ===
Creator: [https://onlinesequencer.net/members/12442 Solea]

How to create:

* Select synthesizer or create a clone.
* Set the waveform to sawtooth
* Set the filter to lowpass and set the frequency to somewhere around 1200
* Change the LFO to pitch, and set the intensity to 5
* click on the ASDR envelope and set the attack, decay, and release to 0. Then, set the sustain to around 0.5.

[[File:Screenshot 2026-02-13 164202.png|thumb|269x269px|Synthesizer settings for oboe|none]]
* In advanced options, set Classic Reverb to about the middle of the slider
* Click EQ and set the High and Mid EQs to around 20.
* Turn the volume down to your liking.

[[File:Oboe2.png|thumb|275x275px|Advanced options settings for oboe|none]]

To make the oboe more realistic, use markers to increase the pitch LFO intensity on long sustains.

[https://onlinesequencer.net/4538032 Example Sequence]

———————————————————————————————————————————————————————————————
=== Oboe 2 ===
Creator: [https://onlinesequencer.net/members/70888 ewrruewc]

How to create:

* Select flute or create a clone.
* Set the reverb to Classic (100%)
* Set the distortion to hornet (100%)
* Lower the mid and high Eqs to -10
* Lower the low Eq to -48

you will need to psuedo sustain for notes longer than a quarter note but it works well for shorter notes

[https://onlinesequencer.net/5160776 Example Sequence]

———————————————————————————————————————————————————————————————

=== Bagpipes ===
Creator: [https://onlinesequencer.net/members/164397 spira.]

How to create:

* Select synthesizer or create a clone.
* Set the waveform to sawtooth
* Set the filter to lowpass and set the frequency to somewhere around 1200
* Set the resonance all the way up to 10
* Change the LFO to pitch, and set the intensity to 5
* click on the ASDR envelope and set the attack to 0.60, the decay to 0.90, the sustain to 0.60, and the release to 0

[[File:Bagpipes.png|thumb|269x269px|Synthesizer settings for bagpipes|none]]

* In advanced options, set Large Reverb to around 0.30

* Click distortion and set it to Hornet with an intensity of 0.55
* Click EQ and set the High EQ to around 9
* Set the detune to -1200 (optional)

[[File:Bagpipes2.png|thumb|Advanced options for bagpipes|none]]

Now, make a clone of the bagpipe, and set the detune to about 10-20 cents above the first synth. Layer both on top of each other to get the bagpipe sound.

[https://onlinesequencer.net/5197846 Example Sequence]

———————————————————————————————————————————————————————————————

=== Ragtime Piano Sustain ===
Creator: Unknown

How to create:

* Create your desired melody with grand piano
* Create a clone and detune it about 20 cents higher than the latter.
* Layer it on top of the other piano.
This is very simple, but it is included because it is very practical.

[https://onlinesequencer.net/5032089 Example Sequence]

———————————————————————————————————————————————————————————————

=== Clarinet ===
Creator: [https://onlinesequencer.net/members/70888 ewrruewc]

How to create:

* Select synthesizer or create a clone.
* Set the waveform to square
* Set the filter to lowpass and set the frequency to somewhere around 2200
* Set the resonance all the way up to 3
* Change the LFO to pitch, and set the intensity anywhere from 2 - 8
* click on the ASDR envelope and set the attack, to 0.10, the decay to 0.30, the sustain to 0.70, and the release to 0

* In advanced options, set Short Reverb to around 0.65
* Click distortion and set it to Hornet with an intensity of 0.25
* Click EQ and set the High EQ to around -35
* Click EQ and set the Mid EQ to around 15

———————————————————————————————————————————————————————————————

=== '''Trumpet''' ===
Creator: [https://onlinesequencer.net/members/150860 wasedrftq1234]

How to create:

* Select brass or create a clone.
* In advanced options, select Gated Reverb to around 1.00
* Click distortion and set it to Tremor at 0.5
* Click EQ and set the High EQ to -45, the Mid EQ to 10, and the Low EQ to 3

[[File:Trumpet.png|thumb|Advanced options for trumpet|none]]———————————————————————————————————————————————————————————————

=== Glockenspiel ===
Creator: Unknown

How to create:

* Select vibraphone or create a clone.

* In advanced options, set Large Reverb all the way up to 1.0
* Move the detune slider all the way up to 1200
* Click EQ and set the High EQ to around -8

[https://onlinesequencer.net/4989097 Example Sequence]

'''Bag Pipes on the brass'''

# go to brass and create a copy
# panning to 0.68
# classic reverb to 1.00
# hornet to 1.00
# high eq to -30.00
# mid eq to 9.00
# low eq to 9.00[[File:How it should look.png|left|thumb|238x238px]]

More instruments coming soon!

File:How it should look.png

2026-02-19T02:47:27Z

Wasedrftq1234:

bag pipes

File:What it should look like if you decide to use small reverb.png

2026-02-16T01:25:15Z

Wasedrftq1234:

boi

Custom Instrument Archive

2026-02-15T23:34:35Z

Wasedrftq1234: changed I typo I did in panning it was spelt planning

This is a list of many custom instruments and sounds created by the OS community.

= Instruments =

=== Oboe/Bassoon ===
Creator: [https://onlinesequencer.net/members/12442 Solea]

How to create:

* Select synthesizer or create a clone.
* Set the waveform to sawtooth
* Set the filter to lowpass and set the frequency to somewhere around 1200
* Change the LFO to pitch, and set the intensity to 5
* click on the ASDR envelope and set the attack, decay, and release to 0. Then, set the sustain to around 0.5.

[[File:Screenshot 2026-02-13 164202.png|thumb|269x269px|Synthesizer settings for oboe|none]]
* In advanced options, set Classic Reverb to about the middle of the slider
* Click EQ and set the High and Mid EQs to around 20.
* Turn the volume down to your liking.

[[File:Oboe2.png|thumb|275x275px|Advanced options settings for oboe|none]]

To make the oboe more realistic, use markers to increase the pitch LFO intensity on long sustains.

[https://onlinesequencer.net/4538032 Example Sequence]

———————————————————————————————————————————————————————————————
=== Oboe 2 ===
Creator: [https://onlinesequencer.net/members/70888 ewrruewc]

How to create:

* Select flute or create a clone.
* Set the reverb to Classic (100%)
* Set the distortion to hornet (100%)
* Lower the mid and high Eqs to -10
* Lower the low Eq to -48

you will need to psuedo sustain for notes longer than a quarter note but it works well for shorter notes

[https://onlinesequencer.net/5160776 Example Sequence]

———————————————————————————————————————————————————————————————

=== Bagpipes ===
Creator: [https://onlinesequencer.net/members/164397 spira.]

How to create:

* Select synthesizer or create a clone.
* Set the waveform to sawtooth
* Set the filter to lowpass and set the frequency to somewhere around 1200
* Set the resonance all the way up to 10
* Change the LFO to pitch, and set the intensity to 5
* click on the ASDR envelope and set the attack to 0.60, the decay to 0.90, the sustain to 0.60, and the release to 0

[[File:Bagpipes.png|thumb|269x269px|Synthesizer settings for bagpipes|none]]

* In advanced options, set Large Reverb to around 0.30

* Click distortion and set it to Hornet with an intensity of 0.55
* Click EQ and set the High EQ to around 9
* Set the detune to -1200 (optional)

[[File:Bagpipes2.png|thumb|Advanced options for bagpipes|none]]

Now, make a clone of the bagpipe, and set the detune to about 10-20 cents above the first synth. Layer both on top of each other to get the bagpipe sound.

[https://onlinesequencer.net/5197846 Example Sequence]

———————————————————————————————————————————————————————————————

=== Ragtime Piano Sustain ===
Creator: Unknown

How to create:

* Create your desired melody with grand piano
* Create a clone and detune it about 20 cents higher than the latter.
* Layer it on top of the other piano.
This is very simple, but it is included because it is very practical.

[https://onlinesequencer.net/5032089 Example Sequence]

———————————————————————————————————————————————————————————————

=== Clarinet ===
Creator: [https://onlinesequencer.net/members/70888 ewrruewc]

How to create:

* Select synthesizer or create a clone.
* Set the waveform to square
* Set the filter to lowpass and set the frequency to somewhere around 2200
* Set the resonance all the way up to 3
* Change the LFO to pitch, and set the intensity anywhere from 2 - 8
* click on the ASDR envelope and set the attack, to 0.10, the decay to 0.30, the sustain to 0.70, and the release to 0

* In advanced options, set Short Reverb to around 0.65
* Click distortion and set it to Hornet with an intensity of 0.25
* Click EQ and set the High EQ to around -35
* Click EQ and set the Mid EQ to around 15

more instruments will be added soon!

'''Trumpet'''

'''Creator'''[https://onlinesequencer.net/members/150860 :wasedrftq1234]

# put panning at 0,75
# put gated reverb or lead/rythem guitar at 1.00
# tremor at 0.49
# high Equalizer at -44.00
# mid Equalizer at 11.00
# low Equalizer at 3.00

[[File:Trumpet.png|left|thumb|How it should look when your done]]

Custom Instrument Archive

2026-02-15T19:26:30Z

Wasedrftq1234: /* Instruments */

This is a list of many custom instruments and sounds created by the OS community.

= Instruments =

=== Oboe/Bassoon ===
Creator: [https://onlinesequencer.net/members/12442 Solea]

How to create:

* Select synthesizer or create a clone.
* Set the waveform to sawtooth
* Set the filter to lowpass and set the frequency to somewhere around 1200
* Change the LFO to pitch, and set the intensity to 5
* click on the ASDR envelope and set the attack, decay, and release to 0. Then, set the sustain to around 0.5.

[[File:Screenshot 2026-02-13 164202.png|thumb|269x269px|Synthesizer settings for oboe|none]]
* In advanced options, set Classic Reverb to about the middle of the slider
* Click EQ and set the High and Mid EQs to around 20.
* Turn the volume down to your liking.

[[File:Oboe2.png|thumb|275x275px|Advanced options settings for oboe|none]]

To make the oboe more realistic, use markers to increase the pitch LFO intensity on long sustains.

[https://onlinesequencer.net/4538032 Example Sequence]

———————————————————————————————————————————————————————————————
=== Oboe 2 ===
Creator: [https://onlinesequencer.net/members/70888 ewrruewc]

How to create:

* Select flute or create a clone.
* Set the reverb to Classic (100%)
* Set the distortion to hornet (100%)
* Lower the mid and high Eqs to -10
* Lower the low Eq to -48

you will need to psuedo sustain for notes longer than a quarter note but it works well for shorter notes

[https://onlinesequencer.net/5160776 Example Sequence]

———————————————————————————————————————————————————————————————

=== Bagpipes ===
Creator: [https://onlinesequencer.net/members/164397 spira.]

How to create:

* Select synthesizer or create a clone.
* Set the waveform to sawtooth
* Set the filter to lowpass and set the frequency to somewhere around 1200
* Set the resonance all the way up to 10
* Change the LFO to pitch, and set the intensity to 5
* click on the ASDR envelope and set the attack to 0.60, the decay to 0.90, the sustain to 0.60, and the release to 0

[[File:Bagpipes.png|thumb|269x269px|Synthesizer settings for bagpipes|none]]

* In advanced options, set Large Reverb to around 0.30

* Click distortion and set it to Hornet with an intensity of 0.55
* Click EQ and set the High EQ to around 9
* Set the detune to -1200 (optional)

[[File:Bagpipes2.png|thumb|Advanced options for bagpipes|none]]

Now, make a clone of the bagpipe, and set the detune to about 10-20 cents above the first synth. Layer both on top of each other to get the bagpipe sound.

[https://onlinesequencer.net/5197846 Example Sequence]

———————————————————————————————————————————————————————————————

=== Ragtime Piano Sustain ===
Creator: Unknown

How to create:

* Create your desired melody with grand piano
* Create a clone and detune it about 20 cents higher than the latter.
* Layer it on top of the other piano.
This is very simple, but it is included because it is very practical.

[https://onlinesequencer.net/5032089 Example Sequence]

———————————————————————————————————————————————————————————————

=== Clarinet ===
Creator: [https://onlinesequencer.net/members/70888 ewrruewc]

How to create:

* Select synthesizer or create a clone.
* Set the waveform to square
* Set the filter to lowpass and set the frequency to somewhere around 2200
* Set the resonance all the way up to 3
* Change the LFO to pitch, and set the intensity anywhere from 2 - 8
* click on the ASDR envelope and set the attack, to 0.10, the decay to 0.30, the sustain to 0.70, and the release to 0

* In advanced options, set Short Reverb to around 0.65
* Click distortion and set it to Hornet with an intensity of 0.25
* Click EQ and set the High EQ to around -35
* Click EQ and set the Mid EQ to around 15

more instruments will be added soon!

'''Trumpet'''

'''Creator'''[https://onlinesequencer.net/members/150860 :wasedrftq1234]

# put planning at 0,75
# put gated reverb or lead/rythem guitar at 1.00
# tremor at 0.49
# high Equalizer at -44.00
# mid Equalizer at 11.00
# low Equalizer at 3.00

[[File:Trumpet.png|left|thumb|How it should look when your done]]

File:Trumpet.png

2026-02-15T19:16:55Z

Wasedrftq1234:

how to make the trumpet