Custom Instrument Archive

This is a list of many custom instruments and sounds created by the OS community.

Instruments

Oboe/Bassoon

Creator: Solea

How to create:

• Select synthesizer or create a clone.
• Set the waveform to sawtooth
• Set the filter to lowpass and set the frequency to somewhere around 1200
• Change the LFO to pitch, and set the intensity to 5
• click on the ASDR envelope and set the attack, decay, and release to 0. Then, set the sustain to around 0.5.

Synthesizer settings for oboe

• In advanced options, set Classic Reverb to about the middle of the slider
• Click EQ and set the High and Mid EQs to around 20.
• Turn the volume down to your liking.

Advanced options settings for oboe

To make the oboe more realistic, use markers to increase the pitch LFO intensity on long sustains.

Example Sequence

———————————————————————————————————————————————————————————————

Oboe 2

Creator: ewrruewc

How to create:

• Select flute or create a clone.
• Set the reverb to Classic (100%)
• Set the distortion to hornet (100%)
• Lower the mid and high Eqs to -10
• Lower the low Eq to -48

you will need to psuedo sustain for notes longer than a quarter note but it works well for shorter notes

Example Sequence

———————————————————————————————————————————————————————————————

Bagpipes

Creator: spira.

How to create:

• Select synthesizer or create a clone.
• Set the waveform to sawtooth
• Set the filter to lowpass and set the frequency to somewhere around 1200
• Set the resonance all the way up to 10
• Change the LFO to pitch, and set the intensity to 5
• click on the ASDR envelope and set the attack to 0.60, the decay to 0.90, the sustain to 0.60, and the release to 0

Synthesizer settings for bagpipes

• In advanced options, set Large Reverb to around 0.30

• Click distortion and set it to Hornet with an intensity of 0.55
• Click EQ and set the High EQ to around 9
• Set the detune to -1200 (optional)

Advanced options for bagpipes

Now, make a clone of the bagpipe, and set the detune to about 10-20 cents above the first synth. Layer both on top of each other to get the bagpipe sound.

Example Sequence

———————————————————————————————————————————————————————————————

Ragtime Piano Sustain

Creator: Unknown

How to create:

• Create your desired melody with grand piano
• Create a clone and detune it about 20 cents higher than the latter.
• Layer it on top of the other piano.

This is very simple, but it is included because it is very practical.

Example Sequence

———————————————————————————————————————————————————————————————

Clarinet

Creator: ewrruewc

How to create:

• Select synthesizer or create a clone.
• Set the waveform to square
• Set the filter to lowpass and set the frequency to somewhere around 2200
• Set the resonance all the way up to 3
• Change the LFO to pitch, and set the intensity anywhere from 2 - 8
• click on the ASDR envelope and set the attack, to 0.10, the decay to 0.30, the sustain to 0.70, and the release to 0

• In advanced options, set Short Reverb to around 0.65
• Click distortion and set it to Hornet with an intensity of 0.25
• Click EQ and set the High EQ to around -35
• Click EQ and set the Mid EQ to around 15

———————————————————————————————————————————————————————————————

Trumpet

Creator: wasedrftq1234

How to create:

• Select brass or create a clone.
• In advanced options, select Gated Reverb to around 1.00
• Click distortion and set it to Tremor at 0.5
• Click EQ and set the High EQ to -45, the Mid EQ to 10, and the Low EQ to 3

Advanced options for trumpet

———————————————————————————————————————————————————————————————

Glockenspiel

Creator: Unknown

How to create:

• Select vibraphone or create a clone.

• In advanced options, set Large Reverb all the way up to 1.0
• Move the detune slider all the way up to 1200
• Click EQ and set the High EQ to around -8

Example Sequence

Bag Pipes on the brass

1. go to brass and create a copy
2. panning to 0.68
3. classic reverb to 1.00
4. hornet to 1.00
5. high eq to -30.00
6. mid eq to 9.00
7. low eq to 9.00

   

More instruments coming soon!